Throwing multiples, without losing your mind.

I remember how I felt about this many years ago. And I commonly hear other potters express this sentiment. Something along the lines of "Ugh! Making multiples of the exact same pot sounds like torture!" Don't worry, the torture is only a phase. There is a point when it becomes bliss. The difference is skill level. If throwing one pot to exact dimensions involves a mental strain, then doing it many times will cause serious brain cramps. But when you can throw to exact dimensions easily, without wasting effort, it is a rhythmic and zen-like process. Hours of quiet work go by. When you say "good night" to the rows of identical pots, they answer back "well you had a productive day, didn't you?"

I have a tool for throwing multiples, which I consider indispensable: a throwing gauge. You can buy throwing gauges, but I made a simple one for free out of a broken gooseneck table lamp. I removed the lamp head and the electrical cord. I attached a metal pin (a leftover part from disassembling the lamp) to the end of the gooseneck with a blob of electrician's putty. Then I secured the putty and the pin in place with electrical tape.

Here's how it works ... throw one pot to the dimensions you want, taking time to measure it carefully. When done, position the throwing gauge so the end of the pin hovers right above the rim of the pot.

Now, the pin guides you as you throw all the subsequent pots. It gives you both the height and the width of the rim. Unlike a ruler or calipers, you don't need to stop throwing to check your progress. Just aim for the pin. And here's a trade secret from a production potter ... when throwing multiples, the only dimensions that matter are the height and width of the rim. The other aspects of shape are not terribly important. As long as the rims are the same height and width, they will read as matching multiples.